YG series Sand Gravel Pump
YG series Sand Gravel Pump is a single stage, single casing, centrifugal horizontal pump. Large flow path make pump allow large particle solids. Simple structure and high chrome alloy liner make the Sand Gravel pump long life and easy maintenance.
Specific information as follows:
Discharge Diameters 4” to 16” (100mm to 400mm)
Heads Range 230ft (70m)
Flow rate 8,000gpm (4,100m3/h)
Casing Pressure Tolerance 300psig (2,020kPa)
Model meaning:
6/4D-YG
6/4:Inlet/Outlet Diameter is 6/4 inch
YG: YG series Sand Gravel Pump
D: Frame type 
Liners material: A05 A07 A33 A49 etc Driven Type: CR ZV CV Seal type:gland seal, expeller seal, machanical seal Discharge direction can be positioned at any intervals in 360 degrees
Applications:
Sand Gravel Pumps are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump.
Such as mining, explosive sludge in metal smelting, dredge the waterway, grudging in dredger and course of river.
After sales service
If necessary, we would arrange the engineer to the pump working place.